科研论文：

[1]Yang L, Wang L, Zhao WH. Hybrid modeling and analysis of multidirectional variable stiffness of the linear rolling guideway under combined loads[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, 234(13): 2716–2727. (SCI: 000516503600001; EI: 20201208332541)

[2]Yang L, Zhang X, Wang L, et al. Dynamic error of multiaxis machine tools considering position dependent structural dynamics and axis coupling inertial forces[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2022. 236(3): 281-295. DOI: 10.1177/09544054211028488 (SCI: 000681105600001; EI: 20213210727863)

[3]Zhang X,Yang L, Zhao Z, et al. Research on the excitation characteristics of milling force for a general helix cutter [J]. The International Journal of Advanced Manufacturing Technology, 2022, 118: 449-464

[4]Pan TH, Zhang Jun,Yang L, et al. Tool breakage monitoring based on the feature fusion of spindle acceleration signal[J]. The International Journal of Advanced Manufacturing Technology, 2021, 117: 2973-2986

[5]湛承鹏，杨磊，杨啸等．基于稳定裕度的机床轮廓控制器增益设计方法[J]．中国机械工程，2020，31(13)：1513–1517．

[6]王磊，杨磊，赵万华等．一种机床参数及其区间变化范围的主动设计方法[J]．机械工程学报，2017，53(09)：108–115．

[7]Wang L, Liu HT,Yang L, et al. The effect of axis coupling on machine tool dynamics determined by tool deviation[J]. International Journal of Machine Tools and Manufacture, 2015, 88: 71–81.